| How to remove the battery |
| Electric vehicle battery removal: 1. Remove the battery together with the battery box, place it on the workbench, and remove the locking screw. 2. Carefully open the battery box, use a 50W electric iron to connect the battery cord from the battery terminals, and immediately wrap the battery terminals with insulating tape to prevent short circuit accidents. 3. When connecting wires between welding batteries, you can weld the next head, hold the joint, and then weld the other joint. After welding, the connection is immediately put to the prescribed place to prevent the connection from shorting the battery. The 4. Some batteries use adhesives to fix the battery to the battery case during installation (usually adhesives are used), and it is necessary to pull the battery to remove it (but not to use too much force). If the operation is difficult, heat the battery slightly, or dissolve the adhesive with a solvent such as alcohol, and remove the battery. Finally, the remaining gaskets or adhesives should be removed and new batteries should be installed. |
| Next:Difference between power battery and storage battery and power tool battery |
.jpg)
.jpg)
